Home   •   Inventory   •   Products   •   Buy   •   Sell   •   Contact Us   •   Viscolour

 

PP3832

High Flow, Medium Impact Polypropylene Copolymer

 

PP3832 resin is a high melt flow, medium impact copolymer with an excellent balance of impact and stiffness characteristics.

 

Features

Typical Applications

-

 

-

 

-

High flow for ease of mold filling

and minimum warpage

Good toughness at refrigerator

temperatures

Low odor and taste transfer

-

-

-

Food and medical containers

Closures, lids, and coverings

Housewares and consumer products

 

 

 

 

Properties(1)

Typical Values

ASTM Method(2)

 

 

 

Melt Flow, dg/min

35

 

D 1238

Density, g/cm3

0.90

 

D 792B

Tensile Strength at Yield, psi (MPa)

3,700 (26)

 

D 638

Elongation at Yield, %

6

 

D 638

Flexural Modulus, 0.05 in/min,

1% Secant, Kpsi (MPa)

170 (1,200)

 

D 790A

Notched Izod Impact Strength,

ft-lbs/in. (J/m) at 73°F (23°C)

1.3 (70)

 

D 256A

 

 

 

 

 

(1)

Values shown are averages and are not to be construed as product specifications.  These values may shift slightly as additional data are accumulated.

(2)

ASTM test methods are the latest under the Society’s current procedures.  All specimens are prepared by injection molding. 

 

Toler Chemicals, Inc. makes no representations or warranties and there are no conditions with respect to the accuracy, reliability or application of the information herein, its products or the safety or suitability thereof, or results obtained, whether expressed or implied including, without limitation, any implied warranty of merchantability or fitness of a particular purpose.  Buyers and users must determine the results to be obtained for the application of the information herein and the safety and suitability of Toler Chemicals’ products for their own purposes, and assume all risk, responsibility, and liability for all injuries, losses, or damages arising from the application of the information herein or use of Toler Chemicals’ products, whether or not occasioned by Toler Chemicals’ negligence or based on strict product liability.  Toler Chemicals, Inc. neither assumes nor authorizes any person to assume for it any liability in connection with the use of the information herein or its products.